You must have javascript enabled to use generatorb.com !

Vdo Pulse Generator

Sender Tach 340-808-001-002g Sending Unit M22 Tachometer

USD $237.50

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated eBay Motors / Parts & Accessories / Car & Truck Parts & Accessories / Interior Parts & Accessories / Gauges / Individual Gauges

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
If you assume your existing generator is broken:  I'm really sorry to disappoint you but it's probably not broken.  Generators do sometimes fail, but faulty or incorrectly hooked up signal wiring is a more common problem, especially on a boat that is old and has wiring runs that are several dozen feet long and snake through dirty and rusted bulkheads.  Test your existing generator first before buying a replacement generator, and also check your electrical wiring for continuity and make sure the G S terminal on your generator has not been mistakenly hooked up to ground (G stands for Geber which translates into Giver, which is equivalent to the English word Sender.  The assumption that it stands for ground is incorrect), and run a new insulated ground wire all the way from the insulated ground terminal on your generator up to the insulated ground terminal on your tach as shown on the instruction sheet that's in the pictures, because I do not allow any returns on electrical parts unless you receive a faulty part or a part that's not as described.  Your existing generator should produce a 10V AC signal from the G S terminal at 1000 RPM, 20V at 2,000 RPM, and 30V at 3,000 RPM. Selling VDO 2-pole diesel tachometer generator sensor kit.  $237.50 non-negotiable per unit plus shipping.  New in box parts, not return items.  No paint marker paint on the parts.  Not junkyard salvaged parts.  Never used or installed.  2 business day handling time, with Priority Mail Express shipping optional.  This is a universal fit replacement parts kit for all applications requiring a VDO part 340-002 VDO part 340-001 VDO part 340-004 VDO part 340.808/1/2 or VDO part 340.808/1/4 or VDO part 340-808-002G or VDO part 340-808-004G or Mercedes-Benz part B8 5200 0654395 or Volvo part 6233384 or Deutz part 01171283 or Caterpillar part 9L7842 generator.  4 pulses per revolution, 10 Volt signal at 1000 RPMs unit.  Generator includes two different interchangeable thread adapter fittings that can both be fitted to the generator, including a thread adapter fitting with a 7/8"-18 female thread pattern on the engine end, and a thread adapter fitting with an M22x1.5 thread pattern on the engine end.  Commonly used on Detroit, Perkins and Caterpillar marine diesel engines.  Also used on most marine engine synchronizer units that require a generator type sender.  Included with the generator is the instruction sheet for the VDO diesel tachometers that use this sender.  The terminals are marked G/S (Geber which translates into Giver/Signal), and -/C (Negative/Case/Ground/Return).  This generator will work on 12 Volt, 24 Volt, and 32 Volt applications interchangeably without requiring a resistor.  The generator generates the power needed to run the tach, and both the generator and the tach mechanism are isolated from the electrical system of the vehicle or power unit when installed.  See my other ads for extension shafts, and 90 degree and 45 degree drive joints that can be used with this generator. This is a single station generator (It runs one tach).  There will be a lag of about 50 rpms at 2200 rpms if you run two tachometers off of it in a parallel circuit.  The lag may increase if your wiring harnesses are longer than four feet long.  So unless your tachs have calibration screw knobs built into the back of the tach casing, to accurately run two tachs per engine it will be necessary for you to run two generators per engine via a splitter drive on each engine.  The addition of  an engine synchronizer gauge won't have any effect on the tachs, because an engine synchronizer gauge works in a different way from the tachs.  See my other ads for splitter drives. If you require resistors or drive keys, please ask me in advance if I have resistors or drive keys in stock before buying a generator from me.  If I don't have resistors or drive keys in stock at the time of your asking, it will take time for me to get the resistors or drive keys stocked.  When I have drive keys and resistors available, I usually don't pre-emptively list them, because someone always buys just the drive keys and resistors without buying a generator, then later when someone is buying a generator from me and needs a drive key and resistor it's not possible for me to supply those parts at that point. FAQ: Q:  "Will this work as a replacement for my VDO generator stamped 340.808/1/2 "? A:  "Yes . " Q:  "Will this work as a replacement for my VDO generator stamped 340.808/1/4"? A:  "Yes."
Q:  "I also want to buy X from you.  Is there a way I can buy both parts without having to pay for shipping twice?"
A:  "Yes.  If you buy this from me, after you have paid for it I will then change the shipping price on X to one dollar."
Q:  "Will this work with a VDO Allentare tach?"
A:  "Yes."
Q:  "My mechanic says he's not sure if this will fit."
A:  "Ask your mechanic if he owns a pair of calipers and a thread gauge.  If so, tell him to measure the diameter and thread pitch of the threaded part of the engine where the generator attaches, and see if it has a 7/8"-18 or an M22x1.5 thread pattern.  If the threaded part of the engine has a 7/8"-18 or an M22x1.5 thread pattern, this part will fit.  If your mechanic does not have a set of calipers or a thread gauge, then it's likely he doesn't know what he's doing."
VDO Pulse Generator Sender Tach 340-808-001-002G Sending Unit M22 Tachometer
See more
Price type
IN STOCK OUT STOCK