You must have javascript enabled to use generatorb.com !

Signal Generator

Pwm Pulse Frequency Adjustable Module Lcd Display 3 Channels

USD $4.44

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Business & Industrial / Test, Measurement & Inspection / Signal Sources & Conditioning / Other Signal Sources & Conditioning

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display 1Hz-150Khz 3.3V-30V PWM Board Module Module highlights
1. Three-way PWM output, adjustable frequency, three-way frequency output, duty cycle can be adjusted independently, suitable for most occasions;
2. LCD liquid crystal display frequency and duty cycle, very clear, very easy to adjust
3. Wide frequency range and high accuracy;
4. Serial communication Module Description
3-way PWM output, wide frequency range, duty cycle can be adjusted independently in real time;
The frequency is divided into four ranges, automatically switching:
1.XXX (no decimal point): The minimum unit is 1Hz, the value range is 1Hz~999Hz;
2.X.XX (the decimal point is in the hundred place) is 0.01Khz, the value range is 1.00Khz~9.99Khz;
3.XX.X (decimal point in ten): The minimum unit is 0.1Khz; the value range is 10.0KHz~99.9KHz
4.X.X.X (decimal point in ten and hundreds): The minimum unit is 1Khz; the value range is 1KHz~150KHz
E.g. Frequency display: 100 represents the PWM output 100Hz pulse;
1.01 represents the PWM output 1.01K pulse;
54.1 indicates the PWM output 54.1KHz pulse;
1.2.4 indicates PWM output pulse of 124KHz;
Duty cycle values ​​range from 0 to 100%, where 100% is expressed in A%.
All setting parameters are saved after power off. Parameter Settings
The module has 8 independent keys to set the frequency and duty cycle, support short press (increase or decrease a unit) and long press (fast increase or decrease), it is very simple, set parameters automatically save, power off is not Lost.
The 3-way duty-cycle button can be pressed at the same time, real-time adjustment, LCD display is the duty cycle of the last pressed button, real-time is very strong, can be used as a simple several-way duty cycle scan. Module Parameters
1. Working voltage: 3.3~30V;
2. Frequency range: 1Hz~150KHz;
3. Frequency accuracy: The accuracy in each range is about 2%;
4. Signal load capacity: The output current can be around 5~30ma;
5. Output amplitude: PWM amplitude and supply voltage are equal;
6. Ambient temperature: -20~+70°C. The Scope Of Application
1. It is used as a square wave signal generator to generate square wave signals for experimental development and use;
2. Used to generate a square wave signal to control the motor driver;
3. Generate adjustable pulses for use by the MCU;
4. Generate adjustable pulses, control related circuits (PWM dimming speed control applications). Serial Control (Single-chip TTL level communication)
Communication standard: 9600 bps
Data bit : 8
Stop bit :1
Check digit :none
Flow control :none
1. Set the PWM frequency
"F1.0.5": The setting frequency is 105KHZ (1.0.0~1.5.0)
2. Set the PWM duty cycle
"Dx:yyy": set the duty cycle of the PWM x: (1 ~ 3) PWM serial number, yyy: (000 ~ 100) duty cycle%;
For example, D1:050, set the 1st PWM duty cycle to 50%.
3. Read the setting parameters
Send "read" string to read the set parameters.
The read data format is as follows: F156, D1: 052, D2: 059, D3: 058,
Successfully set return: DOWN;
Failed to set return: FALL. Package Included:
1 x Signal Generator PWM Pulse Frequency Adjustable Module LCD Display 3 Channels
Instructions/schematic are NOT included. We don't provide technical assistance please make sure that you are familiar with the product before purchasing.

Returns Accepted for this item if it's within 30 Days

Signal Generator PWM Pulse Frequency Adjustable Module LCD Display 3 Channels
See more
Price type
IN STOCK OUT STOCK