Features:
High temperature arc
igniter, with 6-12v high power, ignite cigarette & paper, can work for 20
seconds continuously, and high frequency, good quality, easy to use.
It can be used as high voltage
source for high school science experiment, electronic instrument, negative
ion generator and little science.
It can generate high temperature and high frequency arc, can easily ignite combustible.
According to the coil
principle, the module outputs high voltage pulse current, small volume and
high efficiency.
The peripheral circuit is
simple (simply connect the switch, Install the battery), the discharge is violent. Specifications: Size: Approx. 65 x 24 x 22mm / 2.6 x 0.9 x 0.9in Input voltage: 6V-12V Input Current: 0.5A-2A(depending on the input voltage) Input line length: about 10cm/3.94inch High Voltage type: DC type Output voltage: about 80KV (please pay attention to
safety when used) Output current: 0.5A Output line length: about 10cm/3.94inch High voltage poles ignition distance: ≤1.5cm(1.5cm is
maximum distance, 1cm is better) Note: 1.Input the power of 6-12v, output two levels of terminal can produce
1.5cm length purple high temperature arc, ignition paper,
single high voltage line can also discharge of any metal body,
working without a crack sound. 2.On the input power: 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to
remove the protection board, recommended capacity above 2000mAh) or
Nickel-cadmium/Nimh battery pack, 4V or 12V lead Acid batteries(12V battery works best)
Module Usage Precautions: 1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity. 2. The test arc distance from the short to long
experimental, It is prohibited exceed the maximum arcing distance( <1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules. 3. The module power, the internal is not easy for heat dissipation, so
it can not work for a long time. 4.To determine whether the battery capacity can drive
the maximum output power is the way to measure the battery
voltage when in the arc state. 5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing,
the
smaller the capacity, the lower the voltage will become. It is
recommended to use above 2000MA lithium, it is better to choose above
4000MA battery. Package Included: 1 x High Voltage Pulse Generator Note: 1.The power time is not above 20 seconds each time.
Since the output power is strong, it must be driven by rechargeable
battery or storage battery. Improper voltage and long work will easily
damage the high voltage
module. Be careful when testing and using! 2. Ignite distance keep within 1cm, please. 1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties. 2. duties,taxes,and charges are not included in the item price or shipping fee. 3. T he duties are buyers' responsibility .Please check with your country's customs office determine what these additional costs will be prior to your purchase. 4. All disputes arising from the duties will be submitted to ebay for solution. 1. Any questions, pls. contact us via ebay message or email us. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again beuse sometimes our message system may block some emails. 2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all " 5 " in very area 3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communition and dispatching of your orders.
Returns Accepted for this item if it's within 30 Days