SKU: N/AThis site contains affiliate links for which we may be compensated
Business & Industrial / Test, Measurement & Inspection / Signal Sources & Conditioning / Signal Generators
Eico
324 Signal Generator Capacitor Premium Upgrade Kit I’ve been asked why I don’t
have a kit that includes the other capacitors found in the Eico 324 signal
generator. So, I’ve created a kit that will be described below. I've sold quite a few of these kits and everyone has been happy. Please review my feedback on these kits. This kit will replace the
paper capacitors in your Eico 324 signal generator with fresh new modern equivalent 630v
capacitors. It will also include a new wired BNC connector, an upgrade for the
electrolytic capacitors and rectifier as described below . The
Eico 324 manual/schematic can be readily found on the Internet.This
kit will include the following:(1) .01uf (630V) capacitors (C13)(2) .01uf safety capacitors (C1, C2)C3 and CR1 will be replaced as described below(2) .1uf (630V) capacitors (C8 & C9)(1) .047uf (630V) capacitor (C10)(1) .022uf (630V) capacitor (C11)(1) Wired BNC
panel mount connector (J1)12" of braided sleevingC3 (2 x 20uf, 150V capacitors) are replaced with
(2) 22uf 250V electrolytic capacitors, and CR1 (selenium rectifier) is replaced
with a 1N4007 diode, and a 2.4k 1W resistor. These parts have been mounted
on a terminal strip. This is a drop-in upgrade. This portion is also sold
individually and can be found by reviewing my other auctions.This kit also includes replacements for the 400V C8, C9, C10, C11, and C13 capacitors. These will be replaced with
modern equivalent capacitors rated at 630V. C1 and C2 are replaced with safety capacitors.J1, the Amphenol connector is replaced with a
standard BNC panel mount connector. This will allow you to use widely available
BNC style test leads.The BNC connector easily fits into the hole that
was occupied by the Amphenol connector. Simply unsolder the lead going to the RF
Coarse switch, remove the Amphenol connector, install the new BNC connector in
the existing hole, and solder the wire to the RF coarse switch. I’ve already
soldered a wire to the BNC connector to make this upgrade as easy as possible.Also included is one foot of braided spaghetti
tubing to use where necessary.If you don’t feel that you are technically
inclined to install this kit please find a qualified technician to install this
for you. I will not be held responsible for any damage caused by your
installation. There are no returns on this item!PayPal Payment Only.FREE SHIPPING! I will carefully pack this kit so that it arrives safely. Local pickup is available and free.The free shipping offer is valid anywhere in the
lower 48 only. For Alaska and Hawaii please contact me for a shipping quote. No
international shipping!Thank you for viewing my auction!Please add me to your favorite sellers list.