You must have javascript enabled to use generatorb.com !

3500 W 12-24v Ac 6 Blades Wind Turbine Generator

System+ Charger+ 225a Slip Ring

USD $27.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: slip This site contains affiliate links for which we may be compensated Home & Garden / Home Improvement / Electrical Supplies / Alternative Energy Supplies / Wind Power Supplies / Wind Turbines & Kits

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
Wind Turbine Generator for Land or Marine Use 3500W 12V or 24V AC Wind Turbine + Charger + 225A Slip Ring Turbine Specification: Body Material Aluminium Length 24.8 inches (63cm) Number of Blades 6 Blade length 23.5 inches (60cm) Starting Wind Speed 3m/s (7 mph) Rated Wind Speed 12.5m/s Survival Wind Speed 45m/s Rated Power 3000W Maximum Power 3500W Weight 18.3lb (8.3kg) This model includes:
-1 Wind Turbine
- Blades
- Slip Ring (installed)
- Hub
- Nose Cone
- Screws and Nuts
- Allen Key
- Instruction Manual Introduction:
This is the most mechanically advanced generator in the market today. It features many upgrades that solves performance issues that our competitors struggle with. It is designed to work with charge controllers and grid tie inverters to better utilize the renewable energy generated. The following list will summarize its major features: Connection Overview:
The Wind Generator is connected to the charge controller, which changes the Alternative Current output by the generator to Direct Current (AC to DC). Electricity generated by the wind turbine are then stored to batteries. Note: the 12V Batteries above are not included.
If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. At other times when the turbine cannot generate all the power you need, you would buy power from the grid. This concept is called net metering.
Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility.
Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine. Blade Features
23.5 inch = 60cm , 29 inch = 73cm
- Color: White
- Length: 23.5" OR 29", depending on model (see spec for individual turbine)
- Incorporates highly efficient, true airfoil
- Quiet performance with minimal vibration
- Manufactured using a precision injection molding process that produces blades of exceptional consistency
- Made with new thermoplastic to increase durability
- Smoother and more durable than any blades you can find in the market
- High resistance to bending (over 150 degrees) What is Nylon 6.6?
Nylon is extremely versatile in its applications. It is highly resistant to abrasion
and has excellent resilience
.
Within nylon, there are two groups: nylon 6
and nylon 6.6
. Nylon 6.6 is the premium thermoplastic
. It is the thermoplastic that is most often specified by professional architects and designers because it provides the flexural strength, low-temperature toughness, UV Resistance
and is the most resilient
. Nylon 6.6 performs well in many applications such as wind turbine blades, automotive parts, and other fields that get a lot of wear and tear. Nylon 6.6 has additional molecules that give extra strength and the resilience compared to nylon 6. If you still have no idea what Nylon 6.6 is, do a search on google. Specification Material
Nylon 6.6 + Carbon Fiber (<20%) Mounting
6mm bolts Length
23.5 inches
29.0 inches Width (base)
5 inches
6 inches Weight (per blade)
210g, 7.4oz
300, 10.6oz Built-in Slip Ring
For those who are serious about wind power generation, this is a must have upgrade. Never again will the cable get twisted up. Never again will you have to climb up the ladder and fix the tangles. With Slip Ring
No more tangles! Without Slip Ring Do you really want to untangle this every month? Slip Ring Specification: Circuits 3 Voltage 380VAC/DC Maximum Current 75A X3 Rated Current 50A X3 Working Speed 250RPM Temperature -40'C to 100'C Wire Gauge 6AWG Number of bearings 2 Thread M22x1.5 22mm diameter 1.5mm Thread Pitch Features:
- High voltage / current carrying capacity
- Copper-graphite brushes ensure long life even under extreme load conditions
- Quick connector for fast connection to the AC / DC wind turbine
- Insulated with fiberglass sleeves to protect wires to the wind turbine and make the installation professional and tidy
- Easily taken apart for quick maintenance
- 2x High Quality Metal Sealed Ball bearing to stabilize axle Built-in Tower Adapter with Anti Vibration & Fictionless Rotation System With Dual Bearing - Dual Metal ball bearing to prevent vertical vibration - Yaw shaft diameter: 40mm - 3cm of stabilizing distance with 2 bearings - No vibration = Increase in efficiency - Reduction in noise output - One piece design Yaw body provides more stability Without Tower Adapter / Bearing
- When there is no tower adapter, it makes installation harder than it has to be
-Without bearing, metal connection / joints will grind on each other and wear out
- Plays will get larger and turbine will vibrate during operation Rotor & Body short 24.8 inches (63cm), Long 32.3 inches (82cm)
- Bigger body allow fitting of a more powerful alternators
- Longer body and tail allow the turbine to face wind even if more blades are added
- High surface area tail will let the turbine stay focus to incoming wind Specification
Body Material
Aluminum (with coating)
Length
See Model
Tail Height
33 cm
Tail surface Area
225 cm^2 Number of Magnets
12 Magnet Material
Rare Earth Neodymium magnets Recommended Tower (Pipe) Size
1.5 inch schedule 40 pipe
Actual Pipe diameter: 48mm (1.9 inch)
Recommend adding 2.5mm padding Yaw Body / Tower Mount Inner Diameter 53.3mm, 2.1 inch Hub & Nose Cone Specification
Hub Material
Aluminum (with coating)
Diameter
140 mm
Capacity
6 Blades
Disc Thickness
23mm
Shaft Diameter
for 17mm shaft
Nose Cone Material
Plastic
Diameter
140 mm
Capacity
6 Blades (Depending on Model)
Height
93mm
Thickness
3mm 12V or 24V Wind Turbine Charge Controller Features:
  • GreenergyStar Apollo, Patriot, WindZilla Phoenix and MegaShark wind turbines
  • Compatible with GreenergyStar branded grid-tie inverters
  • System Voltage: 12V or 24V Nominal
  • Microprocessor based control electronics to control charging, outputs and dump load
  • Intuitive LED Display to reflect system status
  • Keeps battery in an optimum charged state
  • High quality finned aluminum casing to protect the interior and dissipate heat
  • Warning: Controller will get damaged if polarity of battery is incorrect, Dump Load must be connected at all times Protection Features:
  • Dump Load MUST be connected at all time to protect the charge controller, no dump load = no warranty
  • Requires a minimum of 1.2Ohm 600W
  • resistive load
  • to be connected to the dump load terminal
  • Dump load activates when AC Turbine is >= 35V
  • Activating dump load will slow down the AC turbine and reduce voltage spikes.
  • Over voltage protection: All outputs will be cut when input voltage is over 30V. However dump load will stay on.
  • The
  • DUMMY
  • LED will turn
  • Red
  • when the dump load has been activated
  • Mechanical Specifications: Operating temperature range
    -25'C - 80'C Weight
    610g
    1.35lb Dimension (L x W x H)
    15.1 x 13.1 x 6.9 cm
    6.0 " x 5.2" x 2.7" Mounting
    Wall Mount at base Cooling
    Passive Casing
    High quality finned aluminum to act as heat sink for fast heat dissipation Maximum Amperage on Terminals
    DUMP LOAD: 28A
    LOAD: 10A
    BATTERY: 15A Three circuit Max 75A X3 =225A Slip Ring for 12V, 24V, 48V up to 380V AC / DC Wind Turbine Generators
    Slip ring is a must have item if you do not want the cables toget twisted up. Installation:
    Install to the wind turbine's axis of rotation and you are done. WARNING !!! Rotating blades present the most serious mechanical hazard. The blades may be moving at velocities over 275 miles per hour (440 km/hr). At this speed, the tip of a blade is nearly invisible and can cause serious injury. Under no circumstances should you install the turbine where a person could come in contact with moving rotor blades. The installer of these blades is solely responsible for the use or misuse of these blades. We assume no liability for ANY injuries caused by these products NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND Terms & Conditions Bidding this auction means that you agree with the following terms & conditions. All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors. Payment Total payment = winning price + shipping & handling Insufficient payment will be charge extra US$0.50 to compensate the Paypal penalty fees. Shipping & Handling Extended Area Surcharg e: For Address that our couriers determined to be outside of their normal service area, they will charge an additional "extended area surcharge". Minimum is US$29.99 , we will notify you if it is higher. Total shipping = Base S&H + Combine S&H ( for each additional item )
    a) Charge the highest shipping cost for the first item.
    b) No combine shipping. ** Please email us if you have questions with the S&H
    1. Combine shipments are only available on the condition of a SINGLE PAYMENT
    . Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts.
    2. We ship within 48 hours after payment is received and confirmed. Please allow up to 5-10 BUSINESS DAYS
    for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location.
    3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees.
    4. We are not responsible for any loses or damages resulting from shipping. Return & Refund Policy
  • No refunds after 30 days
  • Shipping & handling & other service fees are
  • NOT
  • refundable
  • All returned items must be in original packing.
  • Items that are used/ damaged/ deformed or altered in any ways will not be accepted.
  • A 20% restocking fee will be charged on all refunded items.
  • E-mails
  • E-mails are usually answered within 2~3 business days in priority order.
  • Spams and mass e-mailing will be deleted without slightest glance.
  • E-mails with virus or anything subjected to hacking are automatically deleted.
  • Returns Accepted for this item if it's within 30 Days

    3500 W 12-24V AC 6 Blades Wind Turbine Generator System+ Charger+ 225A Slip Ring
    north star generator | northstar generators | star trek the next generation a final unity | star wars shield generator | northstar generator 13000
    See more
    Price type
    IN STOCK OUT STOCK