TYPE 1 :196cc Air-cooled Diesel Engine
Contact seller to get English manual, Please !
Description:
Traditional diesel engines are noisy and inefficient. Now, the replacement is coming. Our diesel engine adopts a 4-stroke engine. The power of 2200w and the speed of 3000rpm can provide you with strong power. The 3L/ 126.8oz fuel tank ensures that you can work for a long time. A good cooling system can prolong its life. It will be a good assistant for your work.
High-end Material:
The diesel engine is made of aluminum alloy, which is durable and not easy to rust. Therefore, you can use it for a long time without frequent replacement, which can save your costs to a certain extent.The diesel engine adopts shot blasting, color galvanizing, and plastic spraying technology, which makes
196cc 4-Stroke Engine Motor Single Cylinder Air Cooled Fit Small Agricultural us TYPE 1 :196cc Air-cooled Diesel Engine Contact seller to get English manual, Please ! Description:
Traditional diesel engines are noisy and inefficient. Now, the replacement is coming. Our diesel engine adopts a 4-stroke engine. The power of 2200w and the speed of 3000rpm can provide you with strong power. The 3L/ 126.8oz fuel tank ensures that you can work for a long time. A good cooling system can prolong its life. It will be a good assistant for your work. High-end Material: The diesel engine is made of aluminum alloy, which is durable and not easy to rust. Therefore, you can use it for a long time without frequent replacement, which can save your costs to a certain extent.The diesel engine adopts shot blasting, color galvanizing, and plastic spraying technology, which makes the product surface smoother and the color brighter. Strong Power: The diesel engine has a power of 2200w and a rotating speed of 3000r/min, which provides you with strong power and ensures that your work can be completed quickly and easily. The diesel engine adopts a socket flow diesel system and single-valve fuel injection. It runs stably, emits less harmful gases, and causes less harm to the environment and the human body. Good Heat Dissipation Effect: The diesel engine is equipped with a forced air cooling system and heat dissipation holes, with a good heat dissipation effect. It can reduce the temperature of the motor in time, prolong the service life of the motor and reduce potential safety hazards. Large Capacity: The fuel tank capacity of the diesel engine is 3L/126.8oz, which can support you to work for a long time. Therefore, you do not need to refuel frequently, which is conducive to improving your work efficiency. Details:
Speed Regulating Handle: The handle is ergonomically designed and can be positioned at any speed.
Air Filter: The air filter with a paper core inside is easy to maintain and disassemble, which can purify the air and make filtration more thorough.
Camshaft: The camshaft is made of steel, which makes the engine work stably and can effectively control the opening and closing of the valve.
Pressure Relief Cover: Made of aluminum, the pressure relief cover can help you start the engine more easily and make the product run more stably.
Base: The base of the product is very solid, which can make the machine more stable and not easy to shake during operation. Application:
This product is widely used in road-cutting machines, grinders, water pumps, micro cultivators, air conditioning compressors, micro-tiller, pastoral management machines, irrigation, and drainage machine, generator set, small transport vehicle, small walking tractors, etc. How to Use:
1. Turn on the fuel switch.
2. Turn the speed handle to the "ON" position and tighten it.
3. Slowly pull the starting handle until it can not be pulled.
4. Then, slowly take it back and let it go.
5. Open the decompression handle and let go.
6. Pull out all ropes with both hands.
7. If the diesel engine does not start, try again from step 3. Specification:
Model: 168F Type:Type: Singer-Cylinder, 4-stroke Diesel Engine,Oblique horizontal Engine
Color: Orange+Black
Material: Aluminum Alloy, Steel, Aluminum
Surface Treatment: Shot Blasting, Color Galvanizing, and Plastic Spraying
Power Source: Diesel-powered
Engine Cooling Type: Air Cooling
Fuel Type: 0#(Summer), -10#(Winter) Diesel Oil
Displacement: 196CC
Rotation Direction: Anti-clockwise
Lubrication Way: Splash Lubrication
Lube Capacity: 0.7L/29.59oz
Lube Brand: SAE10W30 (Above CC Grade)
Rated Output Power: 2.2kw(3HP)
Max Output Power: 2.42kw(3.3HP)
Rotational Speed: 3000rpm
Load Speed: 2800rpm
Fuel Tank Capacity: 3L/126.8oz
Fuel Consumption Rate: ≤280g/ kw. h
Compression Ratio: 22:1
Bore×Stroke: 68×54mm/2.68*2.13inch
Starter System: Recoil Hand Start
Net Weight: 21.6kg/ 47.62lbs
Gross Weight: 27kg/ 59.52lbs
Product Size: 36.1*39.5*30.5cm/14.21*15.55*12.01inch
Package Size: 42.5*38.5*41cm/16.73*15.16*16.14inch Package Included:
1* Diesel Engine
1* English Manual Notes: Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please use the specified diesel and guarantee the diesel is clean. Please use different lubricating oil for different seasons and keep the oil quantity within the specified range. The air filter must be kept clean by cleaning or replacing the filter element regularly. Please don’t run the engine when it exhausts black smoke. When using the air filter, remove the air filter element every 50 hours (if there is much dust, remove it every 10 hours, clean it with clean detergent, blow it dry, and then put it into the air filter for use). Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. TYPE 2 :4-Stroke 196cc Single Cylinder Engine Description: Engine Single Cylinder 4-Stroke 196cc Shaft Length - 53mm Us Stock Product Parameters:
Shell Material: Alloy
Ignition Method: Pull Start
Engine Displacement (Cc): 196cc
Speed (Rpm): 3000r/Min
Maximum Output Power: 2.2kw
Start Mode: Recoil Type Hand Start
Fuel Volume: 3l
Oil Volume: 0.7l
Piston Displacement: 0.196cc
Stroke: 54mm (2.13 Inches)
Bore Diameter: 68mm (2.68 Inches)
Number of Cylinders: Single Cylinder
Injection Pressure: 14±0.5
Hole Size: 0.8mm (0.0315 Inch)
Fuel Consumption Rate: 0.5g/Kw.h
Shaft Type: Flat Key Shaft
Shaft Diameter: 20mm (0.787 Inches)
Shaft Length: 53mm (2.09 Inches)
Shaft Inner Diameter Thread Size: 0.8mm (0.0315 Inch)
Oil System: Vortex Type
Engine Cooling Method: Forced Air Cooling Weights&Dimensions:
Size: 40*30*36cm (15.75*11.81 Inches)
Product Weight: 20kg (44.09 Pounds) Features:
1. Through Advanced Software Analysis and Optimized Design, the Reliability of the Engine in Terms of Structure and Cooling Is Ensured.
2. Optimize the Fuel System and Intake and Exhaust Systems to save Energy and Fuel.Self-injection Fuel System: Good Atomization, Low Fuel Consumption, More Punctual Fuel Injection, and Long Service Life
3. Compact Structure
, Small Size and Light Weight. Compared with Gasoline Engines, It Is More Economical and Lighter than Engines. 4. Large Capacity Fuel ,
Tank Enhanced Thickening, Large Fuel Tank Volume, Special Painting Process, Seam Welding, and Oil Leakage. 5. Alloy Box, Enhanced Thickening,
Fast Heat Dissipation, Low Oil Temperature, Light Weight.
Packing List:
Engine Payment Delivery details Terms of sales About us Contact us Payment We accept Pricetronic payment 。 Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Shipping: 2-9 working days to: USA Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About us Your satis faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you. Contact us Business Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with Pricetronic message. Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with Pricetronic message. Please feel free to contact us if you have any questions. Engine Type Oblique horizontal * Feature *: 🔥high performance🔥reliable quality🔥good stability Manual language Chinese Brand Unbranded Model 168F Type horizontal axis, air-cooled diesel engine Dimensions 395*305*361mm (15.55*12.01*14.21 inches) Product weight 20kg (44.09 pounds) Shell material aluminum Ignition method compression ignition Displacement (cc) 196cc Speed (rpm) 3000 rpm Maximum output (kw) 2.2KW Start method manual start Fuel tank capacity 3L Engine oil capacity 0.7L Net torque 8N.M/2880rpm Number of cylinders single cylinder Compression ratio 22:1 Bore size (mm) 68*54mm (2.68*2.13 inches) Fuel 0# diesel Fuel consumption rate (g / kw.h) 310g / kw.h Starting system hand recoil Shaft type flat key Shaft diameter 2.0cm (0.787 inch) Keyway 5mm (0.197 inch) Shaft length 20*53mm (0.787*2.09 inches) Shaft inner diameter thread size M8*1.25mm (0.049 inch) Oil system splash Engine cooling method air cooling Fuel Type 0# diesel Horsepower N/A Features manual start Application Generator Product Line N/A Power Source N/A Voltage N/A Engine Size 196cc Assembly Required No Maximum Power 2.2 kW Power Rating N/A MPN Does not apply Noise Level N/A Tank Capacity 3L Crankshaft Direction Vertical
Returns Accepted for this item if it's within 30 Days